FujiFilm Film Camera AF3 151E User Manual

AF3-151E  
COLOR NEGATIVE FILMS  
[ ]  
CH  
(A)  
1. FEATURES AND USES  
2. SPEED  
[
]
FUJICOLOR SUPERIA X-TRA 400 CH is a daylight-  
type ISO 400 color negative film that incorporates 4th  
Color Layer and the newly developed Super Fine-  
(Sigma) Grain Technology to achieve high image qual-  
ity when printed on FUJICOLOR papers.  
Light Source  
Speed  
Filter  
Daylight  
ISO 400/27°  
None  
Tungsten Lamps  
(3200K)  
LBB-12**  
(or Wratten No.80A)  
ISO 100/21°*  
*
Indicates the effective speed resulting from designated filter use.  
** Fuji Light Balancing Filter  
Features  
Results  
Excellent Grain  
Quality  
Fine grain for a high-speed  
film, providing no loss of  
image quality even in  
3. EXPOSURE GUIDE  
large-size enlargements  
Use an exposure meter for exposure determination. If a  
meter is not available, refer to the following table.  
High Speed and  
Wide Exposure  
Latitude  
High sensitivity that allows  
images to be captured  
even under insufficient  
light conditions  
Daylight Exposure Guide Table  
Seashore  
or Snow  
Cloudy  
Day or  
Open  
Light  
Conditions  
Scenes Bright  
under Sunlight Sunlight Bright  
Bright  
Sun  
Hazy  
Cloudy  
Vibrant,  
Vibrant and dynamic reds,  
blues, and yellows  
Violets and a variety of  
greens with enhanced  
fidelity  
Natural Color  
Reproduction  
Shade  
Lens  
f/22  
f/16  
1/500  
f/16  
f/11  
1/250  
f/8  
Aperture  
Shutter  
Speed (sec.)  
Excellent  
Skin Color  
Smooth, beautiful and  
naturally depicted skin  
tones  
Reproduction  
NOTES The foregoing settings are for 2 hours after sunrise  
and 2 hours before sunset.  
Excellent  
Sharpness  
Extremely sharp depiction  
of all aspects of the  
Provide lens openings 1/2-stop smaller during the  
summer and 1/2-stop larger during the winter.  
Excessively bright (or dark) or backlighted subjects  
may require plus or minus 1-stop lens opening ad-  
justments.  
subject, from overall form  
to textural details  
Excellent Exposure Accurate color reproduc-  
Suitability even  
under Fluorescent  
Lighting  
tion even under fluores-  
cent lights  
Low Light Exposure Guide Table  
Nighttime  
Fine  
Indoor  
Weather  
Excellent Gray  
Balance  
Precisely maintained gray  
balance throughout, from  
the brightest highlights to  
the deepest shadows  
Light  
Conditions  
Scenes  
(under  
Fluorescent  
Light)  
Evening  
Scenes  
Night  
Scenes  
Daytime  
Indoor  
Scenes  
Lens  
f/2.8 to 4  
1/60  
f/2 to 2.8  
1/30  
f/2.8 to 4  
1/60  
f/2 to 2.8  
1/30  
Aperture  
It requires no color-compensating filters when used  
under daylight conditions or with an electronic flash.  
Shutter  
Speed (sec.)  
NOTE  
Since light intensities for indoor and night scenes vary  
widely from location to location, the data above  
should be used only as a guide.  
– 1 –  
 
[
]
FUJICOLOR SUPERIA X-TRA 400 CH • FUJIFILM PRODUCT INFORMATION BULLETIN  
8. FILM STORAGE  
7. FILM HANDLING  
Unprocessed Film  
Expose film before the expiration date indicated on  
the film package and process as soon as possible  
after exposure.  
When loading and unloading roll film, avoid direct  
sunlight. If there is no shade, turning one’s back to-  
ward the sun will shade the film.  
Storing exposed or unexposed film under hot and  
humid conditions may adversely affect speed, color  
balance and physical property changes. Store film  
under the following conditions.  
Ï
Ordinary Storage: Protect from heat.  
Long-term Storage: Below 0°C (32°F)  
Camera-loaded film should be exposed and pro-  
cessed immediately.  
Ï
Building materials, finishes used on newly manufac-  
tured furniture, paints and bonding agents may pro-  
duce gases which affect photographic film. Do not  
store film, lightproof boxes of film, loaded cameras or  
film holders near these materials.  
Before use, allow films to stand at room-temperature  
over 1 hour. Opening the package/box while film is  
cold may cause harmful condensation.  
Unprocessed film should be kept away from X-rays  
used to inspect checked-in baggage, etc. at airport  
terminals. Strong X-rays can cause fogging of un-  
processed film. It is recommended such film be  
placed in your carry-on baggage whenever possible.  
(Consult with airport personnel for details.)  
Film fogging may occur near X-ray equipment used  
in hospitals, factories, laboratories and other loca-  
tions. Always keep film away from possible sources  
of radiation.  
Processed Film  
Exposure to light, high temperature and humid condi-  
tions can cause color changes in processed films.  
Therefore, place such films in sleeves and store them in  
dark, dry, cool and well ventilated locations under the  
following conditions.  
Ï
General Storage:  
Below 25°C (77°F) at 30% to 60% RH  
Long-term Storage:  
Below 10°C (50°F) at 30% to 50% RH  
Ï
NOTE  
As with all color dyes, those used in this film will dis-  
color or fade with time.  
9. SPECIFICATIONS AND PACKAGING  
9-1 Specifications  
Item  
9-2 Edge Markings  
Item  
• Edge Stripe  
One red solid line and one  
green short broken line on one  
side (changed)  
• Code  
CH  
• Speed  
• Type  
ISO 400/27°  
Daylight  
• Type Designation  
400  
• Process  
• Latent Image Bar Code  
12-8  
CN-16, CN-16Q, CN-16FA,  
CN-16L, CN-16S or C-41  
• FUJIFILM Identification  
Code  
• Size  
135: 12-, 24- and 36-exp.  
X01 and above  
Negative Carrier  
: 135B  
0118  
280  
• Production Number  
: 135C/D/J/K/S  
– 3 –  
 
[
]
FUJIFILM PRODUCT INFORMATION BULLETIN • FUJICOLOR SUPERIA X-TRA 400 CH  
SUPERIA X-TRA 400  
Production  
Production  
Type Designation  
Identification Code  
Number  
Edge Stripe  
(green and red)  
Production  
Identification Code  
Latent Image Bar Code  
9-3 Packaging  
9-4 Post-Processing Masking Colors  
The new SUPERIA X-TRA 400 has slight reddish tint in  
comparison with the current SUPERIA X-TRA 400.  
Item  
• Box  
New Design  
Identification Color: Blue (unchanged)  
Design  
• Cartridge  
(unchanged)  
Identification Color: Blue  
10. TECHNOLOGIES INCORPORATED  
IN NEW SUPERIA X-TRA 400  
11. PROCESSING  
This film is intended for processing by Fujifilm Pro-  
cesses CN-16, CN-16Q, CN-16FA, CN-16L, CN-16S or  
Process C-41.  
10-1 Super Fine-Σ (Sigma) Grain Technology  
By incorporating the Super Fine-Σ (Sigma) grain, a  
further advance over the Fine-Σ (Sigma) grain intro-  
duced in SUPERIA X-TRA 800 film, this film realizes  
very high level of grain quality among ISO 400-class  
films.  
11-1 Replenishment Rate  
The following table shows the replenishment rates for  
each type of Fujifilm Processes.  
To achieve the high sensitivity and small volume of  
the Super Fine-Σ (Sigma) grain, uniform, thin-crystal  
technology was used to produce crystals with ap-  
proximately half the thickness of the hexagonal crys-  
tals used in the current SUPERIA X-TRA 400. The  
higher uniformity in size and improved light-collection  
efficiency of these grains have made possible a film  
with higher sensitivity than that of the current  
SUPERIA X-TRA 400 and extremely smooth grain  
quality, regardless of the film’s high speed.  
CN-16Q  
CN-16FA  
Processing Replenish-  
Processing Replenish-  
Solution  
ment Rate*  
Solution  
ment Rate*  
NQ1-R  
NQ2-R  
NQ3-R  
NQS  
43  
20  
30  
30  
20  
N1-R  
N2-R  
N3-R  
NS  
22  
5
16  
34  
20  
NQ4-R  
N4-R  
10-2 Super Efficient Coupler Technology  
The use of new couplers has enhanced color develop-  
ment efficiency.  
CN-16L  
CN-16S  
Processing Replenish-  
Replenish-  
ment Rate*  
Processing  
Solution  
Solution  
ment Rate*  
N1-R  
N2-R  
N3-R  
N4-R  
15  
5
20  
5
N1-R  
N2-R  
N3-R  
NS  
7.5  
30  
8
17  
15  
N4-R  
*Replenishment Rate ...... Replenisher volume (mL) per single roll  
(135/24 exp.)  
– 4 –  
 
[
]
FUJICOLOR SUPERIA X-TRA 400 CH • FUJIFILM PRODUCT INFORMATION BULLETIN  
4-2 Processing Solution Control  
Use the current 135-size control strips for processing  
solution control.  
13. JUDGING EXPOSURE RESULTS  
SUPERIA X-TRA 400 exposure results can be accurately  
predicted by using an electronic densitometer equipped  
with Status M filters. An 18% gray card, receiving the  
same illumination as the subject, when read through the  
RED filter should render density readings between 0.75  
and 0.95 (for exposures under recommended lighting  
and with optimal film processing).  
4-3 Processing-Photographic Characteristics  
Same as those for SUPERIA 400.  
12. PRINTER CONDITIONS  
This film can be printed on the same printer setup with  
results similar to the current film. However, depending  
on the printer type, a slight blue cast might appear in the  
overexposed areas. If this occurs, adjustment of printer  
conditions may be necessary.  
14. FILM STRUCTURE  
15. DIFFUSE RMS GRANULARITY VALUE .............. 4  
Micro-densitometer Measurement Aperture: 48 µm in diameter  
Magnification: 12 ×  
Sample Density: 1.0 above minimum density  
16. RESOLVING POWER  
Chart Contrast  
1.6 : 1 .......................... 50 lines/mm  
Chart Contrast 1000 : 1 ........................ 125 lines/mm  
– 5 –  
 
[
]
FUJIFILM PRODUCT INFORMATION BULLETIN • FUJICOLOR SUPERIA X-TRA 400 CH  
17. CHARACTERISTIC CURVES  
18. SPECTRAL SENSITIVITY CURVES  
4.0  
Process  
Densitometry : Status M  
Density : 1.0 above D-min.  
: CN-16  
Exposure  
3.5 Process  
: Daylight, 1/125 sec.  
: CN-16  
Densitometry : Status M  
3.0  
2.5  
2.0  
1.5  
Green  
Sensitive  
Layer  
Blue  
Sensitive  
Layer  
Red  
Sensitive  
Layer  
Blue  
Cyan  
Sesitive  
Layer  
Green  
Red  
1.0  
0.5  
0.0  
400  
500  
Wavelength (nm)  
700  
600  
–4.0  
–3.0  
–2.0  
0.0  
–1.0  
Exposure [log H (lux-seconds)]  
* Sensitivity equals the reciprocal of the exposure  
(J/cm²) required to produce a specified density.  
20. SPECTRAL DYE DENSITY CURVES  
19. MTF CURVE  
150  
Typical densities for a mid-scale  
neutral subject and for D-mini.  
100  
70  
2.0  
50  
Mid-scale Density  
30  
20  
Exposure : Daylight  
Process : CN-16  
10  
1.0  
Minimum Density  
7
5
3
2
0.0  
400  
500  
600  
700  
5
10  
20  
50 100  
200  
1
Spatial Frequency (cycles/mm)  
Wavelength (nm)  
NOTICE The data herein published were derived from materials taken from  
general production runs. However, as Fujifilm is constantly upgrading the quality  
of its products, changes in specifications may occur without prior notice.  
– 6 –  
FUJI PHOTO FILM CO., LTD.  
26-30, Nishiazabu 2-chome, Minato-ku, Tokyo 106-8620, Japan  
Ref. No. AF3-151E (EIGI-03.2-HB•4-1 ) Printed in Japan  
!
 

Echo Water Pump WP 1000 User Manual
Electro Voice Microphone 422A User Manual
Everpure Water System EV9273 77 User Manual
Franke Consumer Products Ventilation Hood FTC 622 User Manual
Fujitsu Speaker System TD508II User Manual
Gaggia Espresso Maker Machine Baby Dosata User Manual
GE Clothes Dryer UPSQ495ET User Manual
GE Conference Phone 28821 User Manual
GE Microwave Oven JEJ180 User Manual
GE Water Heater GEH50DEED User Manual