Frigidaire Washer 134305500A User Manual

WASHER OPERATING INSTRUCTIONS  
Before Operating Your Washer  
Read your washer Use and Care Guide. It has bleach and fabric softener to the appropriate com-  
important safety and warranty information. It also partments. They will be dispensed at the proper  
8. Add desired features by pressing symbols for  
Control Lock  
End-of-Cycle Signal  
has many suggestions for best washing results.  
times. Slowly close dispenser drawer. The washer  
will not operate with the drawer open.  
9. Start the washer.  
To reduce the risk of fire, electric  
shock or injury to persons, read the IMPORTANT  
SAFETY INSTRUCTIONS in your washer Use and  
Care Guide before operating this appliance.  
Close the door and touch START. The washer  
will not operate with the door open. As a safety  
measure, the door will automatically lock dur-  
ing the entire wash cycle and “DOOR LOCK”  
will be displayed.  
Note: From time to time you may see water in the  
bleach and fabric softener compartments.  
This is a result of the siphoning action and  
is part of the normal operation of the washer.  
Operating Steps  
To pause the cycle, press STOP/CANCELonce.  
“PAU” will flash alternately with the time remain-  
ing display. The door can then be opened to add  
a forgotten item. However, if the washer was  
paused during final spin, it will take approxi-  
mately 2-3 minutes for the door lock to release.  
Do not force the door open.  
6. Press CYCLES until the desired cycle is se-  
lected. Suitable wash and rinse water tempera-  
tures, final spin speed and options will automati-  
cally be displayed. To change these settings, press  
TEMPS, SPEED and OPTIONS until the desired  
Read and follow “Washing Procedures” in your  
Use and Care Guide. It provides detailed informa-  
tion for preparing the wash load and choosing con-  
trol settings to ensure best washing results.  
1. Sort laundry into loads that can be washed to- selections are made. These adjustments to the  
gether.  
cycle will automatically be remembered each time  
that cycle is selected.  
To restart the washer, press START. Tumbling  
will be resumed where it was interrupted. If the  
washer was interrupted during spin, the spin time  
will be reset.  
To stop the washer, press STOP/CANCELtwice.  
Two dash lines will be displayed.  
2. Prepare items for washing.  
3. Pretreat stains and heavy soil.  
4. Add laundry load to the wash drum.  
7. To select or delete Heavy Soil/Stain,Auto Temp,  
Extra Spin and Extra Rinse, press OPTIONS until  
the flashing light indicates a desired option. Then  
press SELECT to add or delete the option.  
5. Open the dispenser drawer and add the mea-  
sured amount of a high efficiency detergent to the  
detergent compartment. If desired, add liquid  
10. Asignal will sound when the end-of-cycle signal  
option is selected. Remove items when cycle ends.  
Note: To provide the best care for your laundry  
items, not every temperature, speed and  
option is available with every cycle.  
Page 1  
PN 134305500A (0311)  
 
Washer Features  
Error Codes  
Water Level  
Add A Garment  
There is no need to select a water level. The  
washer automatically adjusts the water level to the  
type and size of wash load.  
If the washer stops and the F 01,F 03, F 04 or  
F 05 error code is flashing in the display, press  
STOP/CANCEL, select a cycle and press  
START. If the error code appears again, please  
contact service for assistance.  
The Add A Garment light will be lit during all wash  
cycles as a reminder that a forgotten item can be  
added to the load.  
Cycle Options  
Control Lock  
To select Heavy Soil/Stain,Auto Temp, Extra Spin  
and Extra Rinse, press OPTIONS until flashing  
light indicates desired option. Then press SELECT  
to add that option to the cycle. To delete an indi-  
cated option, press SELECT.  
To prevent accidental operation of the washer or  
alteration of the cycle settings, press and hold the  
lock symbol until you hear 3 beeps and “LOC” is  
displayed. To cancel, press and hold the lock sym-  
bol until “LOC” is no longer displayed.  
F 01 - There may be an internal problem  
with the wash system.  
F 02 - There may be a water temperature  
problem. Be sure hot and cold wa  
ter hoses are properly connected  
before calling service.  
Heavy Soil / Stain  
Use this option to add approximately 6 minutes of  
wash time to very soiled or stained loads.  
Signal  
A signal will sound at the end of the cycle. Re-  
peatedly press the signal symbol to select one of  
three volume levels or turn off the signal. The se-  
lection will be programmed until you change it.  
F 03 - Be sure the water is turned on be  
fore calling service. There may be a  
problem with the pump or pressure  
switch.  
Auto Temp  
The temperature of hot, warm and cold wash wa-  
ter can be affected by the water heater setting and  
seasonally low ground water temperatures in some  
geographic areas. Since detergents work best in  
wash water at a minimum of 65° F, select AUTO  
TEMP to regulate the temperature of hot wash to  
approximately 150° F, warm wash to approximately  
90° F and cold wash to approximately 70° F. Rinse  
Display  
F 04 - The washer may have run too long  
or there may be a problem with the  
motor control.  
The following will be displayed during the cycle:  
Estimated Remaining Cycle Time  
Door Lock  
Cycle Status (WASH, RINSE, FINAL  
SPIN).  
F 05 - There may be a problem with the  
water temperatures are not regulated.  
Signal volume selected  
“LOC” will be displayed briefly when lock  
symbol is pressed.  
keypad.  
Extra Rinse  
Use this option when additional rinsing is desired  
to remove excess dirt and detergent. It is recom-  
mended for heavily soiled loads or if household  
members have sensitive skin. Extra Rinse occurs  
before the liquid fabric softner is dispensed.  
Extra Spin  
Use this option for several additional minutes of  
spin at the selected spin speed. This will increase  
water extraction and decrease drying time.  
Page 3  
PN 134305500A (0311)  
 
 

Electro Voice Microphone EX 18 User Manual
Extron electronic Stereo System MHR 2 User Manual
FEIN Power Tools Drill DDSK 672 1 User Manual
Field Controls Air Cleaner 24v User Manual
Fortinet Network Card FortiLog 100 User Manual
Fujitsu Scanner M3097DE User Manual
GE Microcassette Recorder 3 5375 User Manual
Gianni Industries Door GLZ EM150 User Manual
Gigabyte Computer Hardware GA 8I915P MF User Manual
Goodman Mfg Gas Heater GDS8 User Manual